Category Archives: additive manufacturing

Event: Going for Gold: 3D Printing, Jewellery and the Future of Intellectual Property

Date: Friday 24 March 2017

Time: 10.00am – 5pm

Venue: EB708, Executive Business Centre, Bournemouth University

Register here

Additive Manufacturing or 3D printing as it is more commonly known, continues to push the boundaries of Intellectual Property (IP) law whilst raising questions relating to the protection and exploitation of IP.

This challenge, which extends to the lucrative jewellery sectorraises further questions in relation to creativity, design, copyright and licensing.

This event, which builds on the UK Intellectual Property Office (UKIPO) Commissioned Study on 3D Printing and IP law, led by Bournemouth University (BU) during 2013-2014 (reports published in 2015), will explore some of these questions by bringing together experts from the cultural and business sectors including designers, manufacturers, distributors, policy makers and legal professionals.

The event will also provide the platform for a discussion of the ‘Going for Gold’ project carried out by researchers at CIPPM (Bournemouth University) in collaboration with Museotechniki Ltd and Uformia AS.

This multi-disciplinary event will be complemented by an exhibition of 3D printed jewellery artefacts which will be on display at the event.

Register here

[Image source]

Event: Identifying and Developing Additive Manufacturing Skills for UK Industry

31st March 2017,  10:00 – 16:00

The Manufacturing Technology Centre, Coventry (directions here)

Register your place

Investment in education and training leading to the provision of the right skillsets at the right time will be key if UK industry is to capture the opportunities afforded by the adoption of Additive Manufacturing technologies.

This event aims to bring together those with insight into how Additive Manufacturing technologies will develop and can be most effectively deployed by industry in order to advise Additive Manufacturing UK of the nature of future skills needs. Outputs of this event will be used to inform recommendations for action and will support ongoing work with the UK Government and wider stakeholders. The aim is to ensure that the implementation of the UK Industrial Strategy delivers the skills necessary for the on-going success of the many sectors now adopting Additive Manufacturing within the broader changes being realised through the diffusion of Digital Manufacturing.

The conference will cover topics ranging from how to increase general awareness of the practicalities of adopting Additive Manufacturing, through to the development of specific skills and competences in design and manufacturing for both new entrants to the workforce as well as those already in work. Participants will include organisations wanting to develop the Additive Manufacturing skills and competences of their current and future workforce, as well as organisation providing Additive Manufacturing awareness raising and training courses at all levels. We anticipate that the event will lead to a better and more inclusive understanding of the changes necessary to the education and skills of current occupations as well as potential new roles, and understanding of the timing and scale of such changes in demand.

Register your place here.

[Image source]

New report: Supporting SMEs in creating value through 3D printing re-distributed manufacturing

The final project report from the feasibility study led by Dr Peter Dorrington at PDR, Cardiff Metropolitan University is now online. “Supporting SMEs in creating value through 3D printing re-distributed manufacturing” describes results of the work undertaken at PDR during 2016. The results of this project will be presented at the 3DP-RDM event 3D Printing Where and How on 31st January 2017 at the IfM in Cambridge.

Executive summary

Peter Dorrington

The aim of this report is to present a feasibility study which investigates the key challenges faced by small and medium-sized enterprises (SMEs) to create value through 3D printing-enabled re-distributed manufacturing (3DP-RDM). The key challenges that are investigated in this study include:

  1. The lack of support tools that enable SMEs to see the impact of a 3DP-RDM
    business model;
  2. The lack of design support tools for both 3DP and RDM;
  3. Primary knowledge gaps on 3D printing processes in SMEs;
  4. The gap in understanding and developing an appropriate skills-base within an organisation.

Data was collected through interviews, workshops and surveys with SMEs operating at a range of engagement levels on the 3DP-RDM spectrum. In addition industry and academic experts in the field of 3D printing were consulted. Analysis of the data was undertaken through affinity mapping; thematic analysis; IDEF0 NPD analysis; testing of a value capturing tool; and quantitative survey analysis. The results section of this study maps out in detail the keys challenges relating to points 1 to 4 above.

Accepting the limitations of such a feasibility study, the following recommendations are made to support SMEs in creating value through 3DP-RDM:

  • Embedding 3D printing in secondary education, and tertiary education;
  • Engaging SMEs in the 3DP-RDM conversation;
  • Addressing training needs for 3DP-RDM in SMEs;
  • Furthering the research agenda for 3DP-RDM.

[Image source: PDR]

3D Printing Production Planning Report

The final project report from the feasibility study led by Dr Martin Baumers at the University of Nottingham is now online. “3D Printing Production Planning: Reactive manufacturing execution driving redistributed manufacturing” describes results of the work undertaken at the University of Nottingham in collaboration with HP Enterprise and Knight Graphics. The results of this project will be presented at the 3DP-RDM event 3D Printing Where and How on 31st January 2017 at the IfM in Cambridge.

Executive summary

Martin Baumers, Ender Özcan and Jason Atkin

3D Printing (3DP) technology, also known as Additive Manufacturing, is associated with significant potential for supply chain innovation by enabling manufacturing configurations delivering additional value through differentiated products, for example in terms of production location. It has been suggested that pursuing distributed 3DP supply chains may be the result of strategic deliberation, yet it is also frequently noted that 3DP is prone to higher unit costs than conventional manufacturing. In this report we summarise the findings of a project which establishes an understanding of the relationship between the commercial performance of 3DP and the characteristics of its operation through the development of a demonstrator system.

In most industries 3DP faces the additional challenge of integrating with conventional manufacturing technologies and processes, which are normally operated in a centralised location. Economies of scale form one of the reasons for the dominance of centralised manufacturing, allowing the amortization of substantial costs over large volumes of products for the global marketplace. Complementing such centralised manufacturing, increasingly complex supply chains have emerged. Moreover, the implementation of appropriate supply chains is now seen as a core capability for manufacturing businesses.

In this context, a closer inspection of the typical work flow of 3DP reveals a puzzle: the current process for allocating build requirements to individual (potentially re-distributed) 3DP systems relies on an array of decisions on the operator/technician level, some of which can be automated and all of which will affect the overall efficiency of the 3DP process and the business case for its application. Thus, this project focusses on designing a demonstrator to provide a solution to this puzzle and further our understanding of the implementation of 3DP supply chains. Labelled the “3D Packing Research Application Tool” (3DPackRAT), the software demonstrator shows an avenue to the release of significant additional value by enabling a truly flexible and reactive manufacturing execution methodology that complements the strengths of 3DP. As an integrated approach to the build volume packing and scheduling problems encountered, this tool aims to determine the most appropriate 3DP system for each individual order in an automated process.

Effectively, such tools may allow adopters to leapfrog the gradual evolution of supply chain practise in response to the emergence of 3DP. To achieve this, the integrated computational framework we have implemented enables the inclusion of a wide range of general and location-related aspects in a single optimisation-based production planning procedure. Being fed an order stream, 3DPackRAT is designed to determine the best 3DP system for each build request. Crucially, this approach is also capable of considering the benefits resulting from re-distributed 3DP, driving supply chain structures towards such configurations where beneficial.

Our project was carried out as a collaborative and interdisciplinary programme of work between the 3D Printing Research Group (3DPRG) at the Faculty of Engineering and the Automated Scheduling, Optimisation and Planning (ASAP) Research Group at the School of Computer Science, both at the University of Nottingham, over the course of 2016. The programme consisted of three elements:

  • Formulation of a portfolio of algorithms, heuristics and operational policies capable of addressing the combined build volume packing and scheduling problem for the baseline 3DP technology (Laser Sintering);
  • Development and implementation of the demonstrator system 3DPackRAT up to the status of a minimum viable product, allowing experimentation by 3rd parties;
  • Validation of the demonstrator system by interaction with a group of four industrial domain experts through presentations and live demonstrations, among them high-calibre international members of industry.

The project has demonstrated the possibility of implementing a joined-up approach to build volume packing and machine scheduling in 3DP and has shown that the problem in reality needs to be addressed in a multi-machine and multi-time period setting. Moreover, we have extended existing computational build volume packing methodologies to incorporate temporal aspects to address this problem.

Our interactions with various industrial partners advising the project indicate the requirement for such functionality. The demonstrator described in this report thus provides a first step in addressing the emerging workflow optimisation problem in 3DP in an integrated way.

[Image source: Martin Baumers]

3D Printing Where and How: 3DP-RDM network event – 31st January

What: Final dissemination event of the 3DP-RDM network
Where: IfM, Cambridge
When: 31st January 2017
How: Register your participation on Eventbrite

Following the completion of the second round of 3DP-RDM feasibility studies you are warmly invited to join this dissemination event to hear the final results of these studies. This EPSRC-funded event will feature presentations from the four 3DP-RDM feasibility studies conducted during 2016. Registration for this event is free but tickets are limited. Register your participation on Eventbrite.

Provisional Agenda

12:30  Lunch, registration and networking
13:30  Welcome and introductions
13:45  Overview of 3DP-RDM
14:00  Supporting SMEs in creating value through 3DP-RPM, Dr Peter Dorrington, Cardiff Metropolitan University
14:45  3D Printing Production Planning (3DPPP): reactive manufacturing execution driving re-distributed manufacturing, Dr Martin Baumers, University of Nottingham
15:30  Refreshments and networking
16:00  A feasibility study of mass customisation governance: regulation, liability, and intellectual property of re‐distributed manufacturing in 3D printing, Dr Phoebe Li, University of Sussex
16:45  Driving Innovation in Redistributed Manufacturing: A Comparative Study in the British and Italian Motorsport Valleys, Dr Paolo Aversa, City University, and Dr Sebastiano Massaro, University of Warwick
17:30  Summary
17:45  Close and networking

[Image source]